Newswise — Technology developed at Argonne can help narrow the field of candidates for molten salts, a new study demonstrates.
Scientists are searching for new materials to advance the next generation of nuclear power plants. In a recent study, researchers at the U.S. Department of Energy’s (DOE) Argonne National Laboratory showed how artificial intelligence could help pinpoint the right types of molten salts, a key component for advanced nuclear reactors.
The ability to absorb and store heat makes molten salt important to clean energy and national climate goals. Molten salts can serve as both coolant and fuel in nuclear power reactors that generate electricity without emitting greenhouse gases. They can also store large amounts of energy, which is increasingly needed on an electric grid with fluctuating sources such as wind and solar power.
If you heated the salt on your kitchen table up to 801 C (1,474 F), it would melt, and you’d have molten salt. However, for making and storing energy, not just any salt will do. Scientists are exploring different combinations of salts to get the exact properties needed to cool and fuel a nuclear power reactor efficiently for decades. These properties include lower melting temperatures, the right consistency, and the ability to absorb high amounts of heat, among others.
“We used experimental results to validate our simulation. At the same time, the simulation results provided us more details about which salts to study further. They work with each other.” — Jicheng Guo, chemical engineer at Argonne National Laboratory
Which molten salt blueprints will deliver the desired traits for a nuclear reactor? The potential variations are nearly endless. The study set out to determine whether computer simulations driven by machine learning could guide and refine real-world experiments at the Advanced Photon Source (APS), a DOE Office of Science user facility at Argonne. The results were recently published in the journal Physical Review B.
“We used experimental results from the APS to validate our simulation. At the same time, the simulation results provided us more details about which salts to study further. They work with each other,” said Jicheng Guo, a chemical engineer at Argonne and the paper’s lead author. “This allows us to study multiple compositions at the same time.”
Researchers use the powerful X-rays at the APS to better understand specific salt mixtures by looking closely at their structures. But the time and cost associated with real-world experiments make it desirable to narrow the field of candidates that undergo inspection.
“The possible composition space for molten salts is enormous,” said Nathan Hoyt, an Argonne researcher and co-author of the paper. “So, it would be impossible to try to take experimental data for every possible composition.”
At the facility’s 6-ID-D beamline, a technique called high energy X-ray diffraction captures the patterns generated as the X-ray beams scatter off a sample of molten salt.
“APS is unique for these types of measurements,” said Chris Benmore, a senior physicist at the APS and co-author of the paper. “The high energy X-rays it generates are very good for looking at the structure of molten liquids, glasses and amorphous materials in general.”
Machine learning involves training a computer to analyze a situation based on existing data. But in this case, the researchers did not have an abundance of validated examples to show the model. Building on previous modeling that explored heat-resistant materials, researchers used what’s known as active learning to create a transferable model to analyze molten salts.
Rather than being fitted for one or two specific molten salt mixture compositions, the transferable model can be applied to mixtures across the composition space. The model makes predictions based on principles, in other words, rather than a set of predefined answers. The machine learning simulations were run using high performance computing resources at the Argonne Leadership Computing Facility (ALCF), a DOE Office of Science user facility, and using the Bebop cluster at Argonne’s Laboratory Computing Resource Center.
“We didn’t train the model with examples of that sweet spot composition, where you get the right melting point,” said Ganesh Sivaraman, an Argonne computational scientist and corresponding author of the paper. “Our model managed to predict that sweet spot, even without the corresponding training input.”
Now that the researchers have shown this approach can work, the next step is to work with even more complex data.
“A molten salt reactor is quite a dynamic environment. The conditions change over time, and sometimes impurities can get into the salt,” Guo said. “We want to introduce a tiny amount of these impurities to see whether the model can predict how that affects the overall structure of molten salts and their properties.”
DOE’s Office of Science and DOE’s Advanced Scientific Computing Research program supported the research. Co-authors with Guo, Hoyt, Sivaraman and Benmore are Logan Ward, Yadu Babuji, Mark Williamson and Ian Foster of Argonne and Nicholas Jackson of the University of Illinois Urbana-Champaign.
The Argonne Leadership Computing Facility provides supercomputing capabilities to the scientific and engineering community to advance fundamental discovery and understanding in a broad range of disciplines. Supported by the U.S. Department of Energy’s (DOE’s) Office of Science, Advanced Scientific Computing Research (ASCR) program, the ALCF is one of two DOE Leadership Computing Facilities in the nation dedicated to open science.
About the Advanced Photon Source
The U. S. Department of Energy Office of Science’s Advanced Photon Source (APS) at Argonne National Laboratory is one of the world’s most productive X-ray light source facilities. The APS provides high-brightness X-ray beams to a diverse community of researchers in materials science, chemistry, condensed matter physics, the life and environmental sciences, and applied research. These X-rays are ideally suited for explorations of materials and biological structures; elemental distribution; chemical, magnetic, electronic states; and a wide range of technologically important engineering systems from batteries to fuel injector sprays, all of which are the foundations of our nation’s economic, technological, and physical well-being. Each year, more than 5,000 researchers use the APS to produce over 2,000 publications detailing impactful discoveries, and solve more vital biological protein structures than users of any other X-ray light source research facility. APS scientists and engineers innovate technology that is at the heart of advancing accelerator and light-source operations. This includes the insertion devices that produce extreme-brightness X-rays prized by researchers, lenses that focus the X-rays down to a few nanometers, instrumentation that maximizes the way the X-rays interact with samples being studied, and software that gathers and manages the massive quantity of data resulting from discovery research at the APS.
This research used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.
The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.
#Hot #salt #clean #energy #artificial #intelligence #enhance #advanced #nuclear #reactors